​
 

SET BASE (A) ON THE GROUND WITH THE CASTERS IN THE LOCK POSITION.  

SLIDE THE FRAME (B) INTO THE SLOTS ON THE BASE (A). NOTE THE ARMSTOPS (C) ARE FACING OUTWARD. THIS WILL PREVENT YOUR RUG ARMS FROM EXTENDING PAST THE BASE. 

(8X10 & 8X11 ONLY) - BOLT THE BACK SUPPORTS (D) ONTO THE BACK OF THE FRAME (B) USING THE PROVIDED HARDWARE. LINE THE BACK SUPPORTS UP HORIZONTALLY WITH THE PRE-DRILLED HOLES IN BACK-SIDE OF THE FRAME (B) AND THE BASE (A).  

ONCE BACK SUPPORTS ARE IN PLACE, FIRMLY TIGHTEN DOWN ALL BOLTS. THIS PRODUCT IS DESIGNED TO AUTO-PITCH WHEN THE WEIGHT OF THE RUGS HAS BEEN ADDED. 

INSERT THE ARMS IN PLACE BY MOVING THE ARM INTO THE TOP DRILLED HOLE IN THE FRAME (B) THEN DROP THE ARM INTO THE BOTTOM HOLE.  
 

*** PROVIDED HARDWARE – SIZE  8X10 / 8X11 - (4) 1/2" x 5” BOLTS  - (4) 1/2" NUTS & WASHERS –